Appearance: creamy white liquid
PH:6-8
Viscosity: ≤ 300 MPa s ( 25 ℃ )
Active Substance Content: 10 %
I. Product Features
This product is a new type of special defoamer for paper pulp, which is made up of silicon as main material and with high efficiency and good dispersibility. It can quickly eliminate foams produced by lignin, viscose, resin and other surfactants, and has obvious effect in pulping, washing pulp and papermaking sizing. it has the characteristics of rapid defoaming, small dosage, low price, convenient use, no late pollution, etc.
II. Main Technical Indicators
Appearance: creamy white liquid
PH:6-8
Viscosity: ≤ 300 MPa s ( 25 ℃ )
Active Substance Content: 10 %
III.Usage
1.directly adding or diluting with 1 - 5 times water in pulping or pulp washing process.
2.the usage amount is 0.01 % - 0.3 % of the water system, which can be increased or decreased according to the site conditions.
3.if the defoamer has been diluted, it must be used up in a short period of time.
Iv.Packing & Storage
50kg, 200kg plastic bucket packaging.
Stored in a cool and ventilated place to avoid direct heating ( 5 - 30 ℃ is appropriate ) storage period: 6 months.
This product is a new type of special defoamer for paper pulp, which is made up of silicon as main material and with high efficiency and good dispersibility. It can quickly eliminate foams produced by lignin, viscose, resin and other surfactants, and has obvious effect in pulping, washing pulp and papermaking sizing. it has the characteristics of rapid defoaming, small dosage, low price, convenient use, no late pollution, etc.
II. Main Technical Indicators
Appearance: creamy white liquid
PH:6-8
Viscosity: ≤ 300 MPa s ( 25 ℃ )
Active Substance Content: 10 %
III.Usage
1.directly adding or diluting with 1 - 5 times water in pulping or pulp washing process.
2.the usage amount is 0.01 % - 0.3 % of the water system, which can be increased or decreased according to the site conditions.
3.if the defoamer has been diluted, it must be used up in a short period of time.
Iv.Packing & Storage
50kg, 200kg plastic bucket packaging.
Stored in a cool and ventilated place to avoid direct heating ( 5 - 30 ℃ is appropriate ) storage period: 6 months.