Appearance: white particles
Effective Content: ≥ 88 %
Ion Type:cationic
Molecular Weight: 3 - 18 million
I. Product Features
This product is made up of cationic monomers and acrylamide copolymerized in different proportions. it is a water-soluble polymer. It can adsorb, neutralize, bridge and wrap colloid or suspended particles in water to make them aggregate into coarse flocs, thus improving and accelerating the solid-liquid separation process, including sedimentation, clarification, concentration, sewage and other processes.
II. Main Technical Indicators
Appearance: white particles
Effective Content: ≥ 88 %
Ion Type:cationic
Molecular Weight: 3 - 18 million
Suggested dissolution concentration: 0.1 - 0.3 %
Dissolution time: ≤ 1 hour
III. Performance Characteristics
1. this product is used for the treatment of municipal domestic sewage and industrial organic waste water. it has positive electricity in acidic or salty media and is extremely effective for flocculation, precipitation and clarification of sewage with negative charge on floating particles.
2. used for sludge dewatering. according to the properties of sludge, the corresponding brand of the product can be selected, which can effectively dehydrate the gravity sludge before the sludge enters the dewatering machine. When the product is used for dehydration, it can produce large flocs, does not stick to filter cloth, does not disperse during press filtration, uses less amount, has high dehydration efficiency, and the moisture content of mud cake can reach below 80 %.
3. water treatment flocculant for waterworks using surface water as water source. Less dosage, good effect and low cost. especially, the compound use effect with inorganic flocculant is better.
Iv.Matters Needing Attention
1. the operator should wear protective equipment, skin contact, namely wash with water;
2. at the site of use, if there is a small amount of leakage, a large amount of water can be used to wash it clean; If there is a large amount of leakage, shovel and sweep it first and then rinse it with a large amount of water. in case of emergency, a large amount of yellow sand can be sprinkled first to prevent slipping and injury.
3. this series of products should be sealed and thanked for the cool and dry place to prevent dampness.
4. the storage period is one year.
Packaging and specifications
Pack in 25 kg / bag or 800 kg / bag.
This product is made up of cationic monomers and acrylamide copolymerized in different proportions. it is a water-soluble polymer. It can adsorb, neutralize, bridge and wrap colloid or suspended particles in water to make them aggregate into coarse flocs, thus improving and accelerating the solid-liquid separation process, including sedimentation, clarification, concentration, sewage and other processes.
II. Main Technical Indicators
Appearance: white particles
Effective Content: ≥ 88 %
Ion Type:cationic
Molecular Weight: 3 - 18 million
Suggested dissolution concentration: 0.1 - 0.3 %
Dissolution time: ≤ 1 hour
III. Performance Characteristics
1. this product is used for the treatment of municipal domestic sewage and industrial organic waste water. it has positive electricity in acidic or salty media and is extremely effective for flocculation, precipitation and clarification of sewage with negative charge on floating particles.
2. used for sludge dewatering. according to the properties of sludge, the corresponding brand of the product can be selected, which can effectively dehydrate the gravity sludge before the sludge enters the dewatering machine. When the product is used for dehydration, it can produce large flocs, does not stick to filter cloth, does not disperse during press filtration, uses less amount, has high dehydration efficiency, and the moisture content of mud cake can reach below 80 %.
3. water treatment flocculant for waterworks using surface water as water source. Less dosage, good effect and low cost. especially, the compound use effect with inorganic flocculant is better.
Iv.Matters Needing Attention
1. the operator should wear protective equipment, skin contact, namely wash with water;
2. at the site of use, if there is a small amount of leakage, a large amount of water can be used to wash it clean; If there is a large amount of leakage, shovel and sweep it first and then rinse it with a large amount of water. in case of emergency, a large amount of yellow sand can be sprinkled first to prevent slipping and injury.
3. this series of products should be sealed and thanked for the cool and dry place to prevent dampness.
4. the storage period is one year.
Packaging and specifications
Pack in 25 kg / bag or 800 kg / bag.